A balanced entrance
Two leaves create a symmetrical composition suited to a planned driveway frontage.
Double Swing Gates · product view
Gates ↗
Double Swing Gates
Paired swing leaves create a driveway entrance in solid, slatted, diagonal and decorative designs.
- Select a matching pedestrian gate where required.
- Gate stops and hinges form part of the fitting selection.
Wholesale · OEM / ODM · Project supply
OverviewBenefitsProduct viewsFunctionsSpecificationsIn useUse & careProject checklistApplications & optionsDesign detailsEnquire
PRODUCT AT A GLANCE
Double Swing Gates: key details.
Paired swing leaves create a driveway entrance in solid, slatted, diagonal and decorative designs.
- Material
- Aluminium
- Finishes
- Powder-coated and wood-grain options
- Customisation
- Colours and sizes
Catalogue reference for this product. Final dimensions, materials, components and packing are confirmed for the selected configuration.
THE PRODUCT / Gates
Open the driveway.
Paired leaves create a balanced driveway entrance and divide the opening across two swinging panels. Solid, slatted, diagonal and decorative designs allow the entrance to reflect the architecture of the property. The site needs space for both swing arcs and a coordinated arrangement of posts, hinges and stops. A matching pedestrian gate can complete the frontage when foot traffic is best directed through a separate opening.
SPECIFICATION-LED SUPPLY
Plan the product, components and finish around your market and project.
WHY CHOOSE THIS DESIGN
The details that make a difference.
A coordinated design range
Infill patterns and approved finishes can connect the driveway gate with adjoining fence and pedestrian sections.
Hardware around the layout
Hinges and stops can be reviewed alongside the opening direction and the supporting posts.
PRODUCT VIEWS
A setting. A closer look.
Double Swing Gates in context, with closer views of its form and finish.
Paired swing gates at a driveway entrance
Meeting stiles and vertical infill
PRODUCT INFORMATION
Specifications & options.
Use these details to start your product selection.
| Material | Aluminium |
|---|---|
| Finishes | Powder-coated and wood-grain options |
| Customisation | Colours and sizes |
| Infill designs | Slat, solid, picket and decorative cut-panel options |
| Reference leaf-set W × H | 3000, 3500, 4000 or 4500 × 1600 mm |
Reference dimensions
| Gate width W (mm) | Height H (mm) | Overall W1 (mm) | Overall H1 (mm) |
|---|---|---|---|
| 3000 | 1600 | 3050 | 1680 |
| 3500 | 1600 | 3550 | 1680 |
| 4000 | 1600 | 4050 | 1680 |
| 4500 | 1600 | 4550 | 1680 |
W and H identify the product dimensions; W1 and H1 identify the overall dimensions shown for the illustrated assembly.
Final dimensions, materials, fittings and packing are confirmed against your selected configuration.
PLAN YOUR PROJECT
Applications & configuration.
Explore uses, installation choices and options for your product.
Wide-opening access
Paired swing leaves are used for driveways, estates, storage areas and other entrances requiring a wider opening.
Opening configuration
Discuss manual or automated operation. Select hinges, stops and any motor equipment as a coordinated configuration, with room for both leaves to open.
HOW IT WORKS
Form with a practical purpose.
Open the driveway
Swing leaves provide vehicle access where the agreed arcs remain clear of vehicles and surrounding objects.
Organise the frontage
Pair the main entrance with a compatible pedestrian opening when separate routes suit the project.
A CLOSER LOOK
Design & construction.
Explore the illustrated components and configuration options. Select an image to enlarge it.
IN USE / THE SETTING
Double Swing Gates in context.
Solid double-swing entrance between stone piers
Two graphite double-swing gate leaves with closed vertical boards and a horizontal middle rail between stone driveway piers.
Plan your specification ↗USE & MAINTENANCE
From the first fitting to everyday use.
General guidance for planning and looking after this product. Follow the installation and operating instructions supplied for your exact configuration.
Survey the entrance
Measure the clear opening, post positions, ground slope and available movement space. Confirm the opening direction, hardware and any power requirements.
Install and commission
Follow the approved gate and hardware drawings. Check alignment, stops and operating clearance; powered equipment should be commissioned by the responsible installer.
Everyday use
Keep both swing arcs clear. Operate the leaves in the order specified for the fitted hardware and secure them using the agreed stops or closing arrangement.
Keep it in good condition
Inspect hinges, stops and closing alignment on both leaves.
PREPARE YOUR SPECIFICATION
A practical checklist for your enquiry.
Use these points to organise a trade brief or site layout for Double Swing Gates.
Clear opening and movement
Provide the clear opening, leaf layout and ground levels. Allow for the swing arc or sliding run of the chosen design.
Hardware and operation
Agree the hinges, locking arrangement, stops and any track or roller requirements. Confirm responsibility for powered equipment.
Entrance package
Coordinate posts, infill, finish and adjoining fencing. Include access direction and the intended daily use.
Include drawings, estimated quantity, destination and finish when discussing your configuration.
IN USE / ANOTHER PERSPECTIVE
A place for Double Swing Gates.
Double-swing access on a brick-lined approach
A closed graphite two-leaf swing gate with vertical infill and middle crossrails on a brick-lined residential approach.
Plan your specification ↗PRODUCT QUESTIONS
A clearer starting point.
What should I include when enquiring about Double Swing Gates?
Share the required dimensions, quantity, finish, destination and installation layout. Gates components and options should be confirmed for the selected configuration. Include drawings or reference images when you email the team.
How should this product be used and maintained?
Keep both swing arcs clear. Operate the leaves in the order specified for the fitted hardware and secure them using the agreed stops or closing arrangement. Keep the ground beneath the swing paths clear and arrange adjustment if a leaf drags or fails to close correctly.
Which specifications are listed for Double Swing Gates?
The illustrated product lists Material: Aluminium; Finishes: Powder-coated and wood-grain options; Customisation: Colours and sizes. Confirm the final specification for your selected configuration.
How do I prepare the site information?
Measure the clear opening, post positions, ground slope and available movement space. Confirm the opening direction, hardware and any power requirements. Share the layout with the responsible installer and our team before finalising the product schedule.
BUILD A COORDINATED OUTDOOR RANGE
Explore complementary products.
Coordinate appearance and site requirements across the space. Confirm product compatibility and installation details separately.
TRADE & PROJECT ENQUIRIES
Make it part of your next project.
Share the quantity, destination, dimensions and finish you need.
CONTINUE EXPLORING